Shandong Xinyixiang Auto Parts Co. Ltd.

sanli

NEWS CNETER

Cooler oil leakage is mostly caused by thinning and rupture of the shell

When the oil cooler leaks, many customers do not notice, and continued use will cause damage to the performance of the oil cooler as well as insecurity, so this requires us to deal with it in a timely manner. Today, Yuanwang Heat Exchange is here to explain the causes and solutions of oil cooler leaks.

28

2021

/

08

What factors affect the price of plate heat exchanger

The general operating temperature of the plate heat exchanger in the -50-150 or so, 180 ° condition operation is not impossible, but the gasket is very simple to present the phenomenon of swelling and deformation, often requiring protection and replacement. The temperature exceeds 180, you can consider all-welded plate heat exchanger!

28

2021

/

08

How much do you know about the types of oil coolers?

The oil cooler is placed in the cooling water circuit and uses the temperature of the cooling water to control the temperature of the lubricating oil. When the temperature of lubricating oil is high, it relies on cooling water to cool down, and when the engine starts, it absorbs heat from cooling water to make lubricating oil raise temperature rapidly.

28

2021

/

08

Use and maintenance of valves

With the rapid development of China's industry, Shanghai Yiling production of electric control valve in metallurgy, petrochemical and other fields of application more and more widely, its stability, reliability also becomes more and more important, its working condition of good or bad will directly affect the automatic control process, this article will elaborate the use and maintenance of electric control valve.

16

2021

/

08

Installation and commissioning of butterfly valves and common troubleshooting methods

This product whether manual, pneumatic, hydraulic, electric each component in the factory are strictly debugged, the user in the review of sealing performance, the import and export sides should be fixed evenly, close the disc valve, pressure on the import side, in the export side to observe whether there is leakage phenomenon, in the pipeline for strength experiments before the disc plate should be opened to prevent damage to the sealing vice.

20

2021

/

07

One Minute Primer What is the purpose of the adaptor valve on a tractor trailer?

Adaptor valves were first used on models with front discs and rear drums. Because the disc brake has the characteristics of automatic gap adjustment, while the earlier drive axle used a non-automatic brake gap adjustment arm. In order to solve the problem that the front brake is too sensitive when braking due to the increase of the brake gap in the front disc and rear drum type vehicles, the front axle braking system is equipped with an adaptor valve for adjustment.

06

2021

/

07

Why noise is generated when gears are meshed

Gear machining is mainly a process to obtain the specific structure and accuracy of gears by mechanical means. In the process of machining, noise sometimes occurs, and gear noise is mainly due to the vibration caused by the collision between gears meshing with each other and the sound emitted.

17

2021

/

06

Introduction to meshing impact in gearing

When a pair of gears is machined and completed, the gear teeth will usually be deformed elastically by the force applied to them when they are meshed. When the gear teeth of two gears are meshed, the load force of the previously meshed gear teeth will usually be relatively reduced, and they will resume deformation toward the load position, thus giving the gear an acceleration.

15

2021

/

06

< 1 2 >

Mobile website

Shandong Xinyixiang Auto Parts Co. Ltd.

Shandong Xinyixiang Auto Parts Co. Ltd.

Address: East of Zhenxing Road, Chiping County

TEL：86-635-4231698

Mobile phones：86-15863564999

FAX：86-635-4231166

E-mail：xinyixiang@outlook.com radiator@sdxinyixiang.com

copyright © 2022 Shandong Xinyixiang Auto Parts Co. Ltd.